Control systems & components for industrial heating, ventilation, air conditioning

EKR6.1

EKR 6.1 is a proportional controller for electric heating, with automatic adaptation of voltage.

 

EKR 6.1 is a proportional controller for electric heating, with automatic adaptation of voltage. An internal or an external sensor is used with the device. EKR 6.1 controls the heating intensity by switching electrical power on or off. The ratio between the on-time and off-time depends on the need for heating and can vary in the range between 0% and 100%. EKR6.1 is suitable for the control of electrical heating only. Its principle of operation preclude its being used for the control of motors or lighting systems. EKR6.1 is not suitable for the control of three-phase electrical current, it is used to control monophasic and diphase heaters only. Night function (NIGHT) - setpoint reducing 0..10°C, then timer is connected and its contacts close. Supply air temperatures can be limited (MIN, MAX), then 2 sensors wiring diagram is used. 

 

Max. controlled load [kW]

6,4/400V, 3,2/230V

Max. controlled current [A]

16

Voltage [V]

230-415

Frequency [Hz]

50-60

Phase

1~230V, 2~400V

Dimmensions (LxWxH) [mm]

150 x 80 x 45

IP class

IP20

Room temperature  [°C]

30 max.

Ambient temperature

0-30°C

Ambient humidity

90%RH max.